I dont even know how to summarize that machine ๐
It is absolutely awesome.
Turris is a company by the czech TLD registrar CZ.NIC, which is ran as a nonprofit and invests a ton in open source network software.
The Origin
This talk summarizes it well:
https://www.youtube.com/watch?v=cB5OG_V3aSE
They wanted to build a device to analyze hacking attacks on the people in Czechia.
The device should be as close to the network as possible (i.e. a router) and have compelling and understandable hardware that could be upgraded over time.
So... they made a router. Originally using PowerPC, now on ARMv7 (poorly only their mobile MOX already is on ARMv8).
Where to get it
Originally they gave the devices away for free, under the agreement that the users contributed the Sentinel analysis data.
Then they opened an indiegogo campain, which far exceeded their expected amount of funding.
Afterwards they had their own webshop, which is now discontinued.
Instead, these stores are available:
- Rubytech DE (The strangest signup method I ever had :) but all fine)
- Discomp CZ
- Amazon
Note: they sent me an additional Tshirt, ethernet cable and tube scarf, which is... interesting, but could be considered waste.
Tbh, I use the tube scarf daily :D
Poorly they didnt add any stickers!
Also, they dont have a good system to determine the recipient country, so I have an additional power supply cable for another country.
They also included a wall mount, with a set of perfectly fitting, longer screws.
All screws have regular phillips heads.
Software
They took OpenWRT, but extended it a ton. As they have 8GB of storage and 2GB of RAM, they can do stuff way above the minimum hardware requirements of OpenWRT.
They have a graphical package manager in the WebUI, and use BTRFS snapshots for atomic updates. Which is totally cool!
That was over 10 years ago and the first router they made is still supported with updates.
Hardware
The data sheet can be obtained here.
The "Omnia Wifi6" I got uses a bit outdated hardware, similar to my Thinkpad T430. They will very likelybswitch to m.2 slots and ARMv8, so you may want to wait for such a revised model.
The current Omnia has 3 mini-PCIe Slots, 2 USB-3 ports and a ton of pins accessible from the inside.
- The left one supports USB, and below you can plug in a SIM card and use an 3G/4G/5G card. With an additional package, this can be used to automatically fallback to cell network, when the regular connection fails.
- The middle one is just mini-PCIe
- The right one supports mSATA so with a simple adapter you can use SATA SSDs for near-native speed. (I want to do that, but it may need an additional power supply)
And, of couse in the front it has fancy RGB LEDs. They are used as indicators for the running state, and for the action you do by pressing the "Reset" button.
In the back it has 4 ethernet sockets, 1 WAN ethernet socket to connect to the internet, one SFP socket for a fiber connection, a multi-purpose button and a power socket.
The button in combo with the LEDs is used for various things like reboot, reset, update, update from local file, update from internet.
Setup
To set it up, connect it to power and with one of the LAN (not WAN) sockets to a Laptop, using ethernet.
Right, before setup it doesnt open a wireless connection! This was confusing for me but really make sense.
In the browser enter http://192.168.1.1 and a very nice graphical WebUI guides you through the setup.
If you use it over LAN, accept the self-signed TLS certificate in your browser, then HTTPS should work.
Applications
It runs a highly extended variant of OpenWRT. There is a huge amount of software. It varies from preinstalled installable through packages, from Foris WebUI integrated to advanced, requiring the normal OpenWRT LuCI or requiring configuration through the terminal.
An incomplete and chaotic overview:
- file server: SMB, DLNA, encrypted storage, mdadm
- Transmission bittorrent client
- OpenVPN server & client
- Wireguard (advanced)
- Nextcloud, Syncthing (both have acessible login pages from the main WebUI)
- Tor
- Adblock
- Dynamic firewall
- haas: honeypot as a service (needs a public forwarded IPv4 address)
- Turris Sentinel: security data collection service, analyze incoming threats (the use they originally intended)
- Librespeed: lightweight network speed test
- support for LXC containers to run your favourite Linux distro
- schnapps to manipulate BTRFS snapshots
- LAN monitoring with PaKon and Morce
NOTE: the data collection service "Sentinel" is opt-in and disabled by default.
DNS
The DNS Server is not set, I used nic.cz with DNSSEC, other providers like Cloudflare and Quad9 are also available, just like manual setup.
DNSSEC works with a single button press, without any issues!
Configuration
You can configure things with a config file, that you insert over a USB stick.
Storage
You can plug in an external drive (USB of course, but I want to try mSATA to SATA) and it formats it and moves all data on there.
It sets up different RAID systems, I dont know if encryption is supported.
So, you have over 7 different ways to host a fileserver on there, up to a full instance of Nextcloud. This is crazy!
Wifi Routing
You can open 2 Wifis (no idea how that works) and each can also have a separated Guest network.
Security:
- By default, WPA3 with WPA2 fallback is used. I changed it to WPA3-only, as WPA2 is vulnerable to attacks (see this video on how to sniff passwords with Kali Linux, which requires a custom kernel driver)
- 2 Guest networks possible, I highly recommend to use those for everyone apart from Admins
- VLANs are also supported, and need to be enabled.
- Reminder: before first configuration, no Wifi is enabled. There is no initial password set.
- you can have different passwords for the admin WebUI and ssh.
The reach is great, but roughly equal to the modern Fritzbox we already have, which only has a single, hidden antenna.
The time to connect to the Wifi is a bit longer than at the FritzBox.
Community & Support
Their code is all hosted on the CZ.NIC Gitlab.
The Turris team can be contacted via email and they respond pretty quickly.
The same contact is used for repairs.
They also have a Discourse Forum for a long time, where people can exchange bugs, issues, software and hardware mods, adapters etc.
Yes it is. And mine was even more expensive I think.
Especially as they have "a lot" of storage, but not really modern hardware.
You pay for the 10+ years of support
That is kind of an understatement, I believe the hardware is now at least 8 years old if Iโm not mistaken, and to me the biggest deterrent right now. If they updated the hardware to relatively modern standards I wouldnโt mind the price tag and probably buy one immediately. As it stands though, no chance.
Yes, that is very true. I think it doesnt really matter? But I am not sure how well microcode and firmware updates go over the years.
For that price it does. I can build the same thing for a fraction of that cost
Yes that is true. That old hardware should cost less, to explain a potentially higher price once a model with recent hardware comes out.
It is not mainly about the hardware though, but the software updates. If you think about the work that they invested here, it gets more reasonable.
Buying opensource hardware is always just a service for users who cannot do that themselves. The schematics are opensource, the entire modified OpenWRT is opensource, and they also contribute to upstream OpenWRT (so there is another investment in the more general FOSS world here).
I have not analyzed how much % they do in OpenWRT but that would be really interesting.
I don't see any benefit to buying specialized hardware. Why would you need "open source hardware?"
OpenWRT replaces the old OS. I really don't see the benefit of shelling out for such devices. If you want to help work on porting devices. Either port a new device or work on testing and bug fixing OpenWRT 21
What would you base it on? I'm interested in the DIY approach setting up a router.
Off the shelf devices are fine. You could even go used for cost savings. Just flash OpenWRT and you are done. A router shouldn't be hosting services. That is a servers job.
Thinking about it... Doubt that
I can just get a cheap single board computer
If all you need is a router, Mikrotik also offer stellar support, lots of configuration options and are much cheaper for the same specs.
If it wasnโt for RouterOS which is closed source and has such a dated ui/uxโฆ
If this is supposed to be an alternative, only OpenWRT supported devices make sense. There are a lot
Could you post a link?
They have a ton of products and dont advertize their routers that much.
Is RouterOS FOSS? I couldnt find source code, and an AI told me it is a Linux based proprietary OS.
Are the routers just OpenWRT compatible? I see a lot of them are. But TurrisOS can do a ton more than OpenWRT!
I found a big router with only 2,4GHz, a few small access points that would be totally fine for that job, this Wifi6 router but with way lower specs and less modularity
I agree that this router is really expensive, the case is elegant but pretty primitive, and the hardware is very old.
But I didnt see anything with 2GB RAM and such an advanced OS.
This one is more or less comparable I believe. No idea about FOSS though, if it's important then my advice is invalid, of course. But if I personally was going for a FOSS router, I'd just get an old-ish computer with several NICs inside and install some BSD on it.
No, their RouterOS is not FOSS.
But if it is supported by OpenWRT, that may not be necessary. As long as you can update firmware and microcode even from a different OS. I have no idea if OpenWRT can do that.