this post was submitted on 04 Aug 2024
74 points (98.7% liked)

Linux

48038 readers
740 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago
MODERATORS
 

Hello! My question is basically what the title says. I'm searching for an IDE/text editor for Go development and am wondering if anybody knows an alternative to these. Here is the list of software I tried:

  • I've tried NeoVim but I really don't want to waste time doing text-based configuration and messing with extensions just to get some basic features working.

  • I tried VSCodium but it doesn't exist in my system software repositories (I'm currently on Chimera Linux), and the flatpak version can't run any system commands.

  • GoLand and Sublime Text are proprietary & paid.

It seems the market for IDEs is pretty small, so I wouldn't really be surprised if nothing existed that fit these criteria, but thanks for any answers in advance!

Edit: I've settled with Lite-XL which seems to be a great editor. Thanks for all of your great recommendations!

top 50 comments
sorted by: hot top controversial new old
[–] [email protected] 18 points 3 months ago (1 children)

You could consider something like LazyVim installed on top of Nvim so you don't have to configure it from scratch.

[–] namingthingsiseasy 8 points 3 months ago

+1, I would recommend neovim with lazyvim. The documentation is excellent, and it's very easy to set up.

https://www.lazyvim.org/installation

[–] [email protected] 18 points 3 months ago (1 children)

Zed now has Linux support.

And then helix editor works with Go LSP, this is my current daily driver. Even without plugins, helix works better and manageable than vim/emacs. Only thing that doesn’t work is debugger.

[–] [email protected] 1 points 3 months ago (1 children)

If you don't mind, can you share your helix config?

[–] [email protected] 1 points 3 months ago (1 children)
load more comments (1 replies)
[–] [email protected] 16 points 3 months ago* (last edited 3 months ago)

Pulsar is a fork of Atom under active development. We don't publish a flatpak (yet) but there is a community maintained flatpak for it.

Otherwise if you want to look at something else I'd give Lite XL, Lapce or even Zed (it has now been open sourced and looks like it has a flatpak available) a look as interesting alternatives.

[–] [email protected] 15 points 3 months ago (1 children)

I found emacs to be perfectly fine. Didn't need an IDE. Go compiler then was astoundingly fast--instant builds, basically. I think newer Go compilers are slower but generate better code. It would be nice to have a compile time flag to turn the slow optimizations on and off, like C compilers have.

[–] [email protected] 12 points 3 months ago (1 children)

Why not just download a binary and/or make your own binary from the vscodium github page?

They've got a ton of statically linked ones to chose from that should be simple to just untar and run.

[–] [email protected] 3 points 3 months ago (2 children)

I would really prefer getting the text editor from flatpak or the system package manager for auto-updates, though I'm not sure if the binaries you mention also get auto-updates.

[–] [email protected] 2 points 3 months ago
  1. Install nix.
  2. nix profile install nixpkgs#vscodium
  3. nix profile upgrade '.*'

Won't auto update but you could add the upgrade command to a login script or something.

Won't lie, nix has a high learning curve to get the most out of it, but installing a single app is pretty simple.

[–] JackbyDev 2 points 3 months ago

Codium auto updates itself, yes.

[–] [email protected] 12 points 3 months ago* (last edited 3 months ago)

Distrobox will resolve your issue with VSCode and then some. Run archlinux, debian or whatever you want as a container. Then, install VSCode/VSCodium (and any other apps that Chimera lacks) inside the container OS. This will keep your development environment containerized and safely away from your host OS.

[–] nous 10 points 3 months ago (1 children)

I’ve tried NeoVim but I really don’t want to waste time doing text-based configuration and messing with extensions just to get some basic features working.

This is the reason I switched to helix. Comes out the box with what you would expect so you dont need 10s of plugins and 100s of lines of config to get a base line experience.

[–] [email protected] 1 points 3 months ago* (last edited 3 months ago) (1 children)

Yeah, but what happens when you're too used to using Emacs with evil mode, vi mode in the shell, and (neo)vim for a long time? And now you have to start using helix and its own bindings. If there was a helix with full vim bindings (and plugins, for custom themes) support, I'd probably be using it right now.

[–] nous 2 points 3 months ago

I did not find it very had to relearn the difference in bindings. Quite a lot are actually the same but one big difference is the selection before action rather than vims movement then action. Which IMO I find the helix way nicer after using it for a while. Never really lost the ability to use vim either and I can switch between them with relative ease. Though I do miss the helix way of working when I am forced to use vi input on things.

[–] [email protected] 9 points 3 months ago

I enjoy VSCode mixed with some Sublime (employer-provided) and Vim in some tmux terminal windows, but I tend to be an oldschool developer who doesn't really ask for much beyond good syntax highlighting. YMMV.

[–] murtaza64 8 points 3 months ago

I think neovim with kickstart has out-of-the-box support for go, or if not, should be configurable with two added lines (add the treesitter parser and LSP). Unlike nvchad and lunarvim and stuff, this is not a "distribution" of neovim but a good starting point for a config that makes it easy to slowly learn how to add stuff and change stuff as you see fit.

At the beginning, you can add languages that you need support for pretty easily by adding to a list of LSPs and Treesitter parsers that should be installed; later on you can start adding and configuring plugins as you wish.

I'd say it sets you up about the same level as Helix or a little less than VSCode.

[–] [email protected] 6 points 3 months ago (1 children)

I use Neovim, specifically LazyVim. It's super easy to get up and running with Go.

[–] [email protected] 4 points 3 months ago

I really love how LazyVim have support for a lot of languages as Extras. Once I needed Go formatting so, installed Go extra, restarted NeoVim and all was ready, in less than a minute!

[–] [email protected] 5 points 3 months ago (1 children)

What do you want an IDE to do (that a straight-up text editor wouldn't?)

[–] [email protected] 3 points 3 months ago

I just need something that supports gopls and some basic features such as syntax highlighting, reasonable indents, code-completion etc.

[–] [email protected] 5 points 3 months ago (1 children)
  • I've tried NeoVim but I really don't want to waste time doing text-based configuration and messing with extensions just to get some basic features working.

Have you tried any of the premade Neovim configurations like Lunarvim or NvChad?

Apart from that maybe something can be done with vscodium in a distrobox container or something, I haven't looked much into that.

load more comments (1 replies)
[–] KindaABigDyl 5 points 3 months ago* (last edited 3 months ago)

You can use VS Code and Vim/Neovim for any language, as well as document writing and basic text editing. Just search for Go plugins

It shouldn't be hard to use either. If it is, you're doing something wrong probably

[–] [email protected] 4 points 3 months ago* (last edited 3 months ago)

Helix or GNU Emacs, you can't go wrong

[–] [email protected] 3 points 3 months ago* (last edited 3 months ago) (2 children)

GVim is available pretty much everywhere? And it’s infinitely customizable.

It does have a learning curve, but then you get to use that knowledge for the rest of your life.

load more comments (2 replies)
[–] [email protected] 3 points 3 months ago
[–] [email protected] 2 points 3 months ago

Just use vscode. It's basically the standard text editor for everything nowadays. Eventually you may want to start exploring vim/emacs but no reason to prioritise that now when all you need is something you can write code in that gives you squigglies when you do something wrong.

[–] [email protected] 2 points 3 months ago (1 children)

I use lite-xl, it has been very good, but I'm not a Go developer though.

They also release an appimage and I just did a quick test on a alpine container and it works, so it should work on Chimera as well.

[–] [email protected] 2 points 3 months ago (2 children)

lite-xl seems very interesting, but sadly I wasn't able to launch it on Chimera Linux (I get the error cannot execute command "./LiteXL-v2.1.5-x86_64.AppImage": No such file or directory on any shell I try to launch it with). Is this a simple problem I can fix, or should I run it with Distrobox?

[–] [email protected] 1 points 3 months ago (1 children)

nvm I just noticed that the issue is that I had the gcompat package installed in alpine, which fixes that issue you just had, I don't know if chimera has something similar to it.

load more comments (1 replies)
[–] [email protected] 1 points 3 months ago

That's interesting that it doesn't work, iirc the biggest difference of chimera is that it uses musl like alpine does.

Can you extract the appimage with --appimage-extract flag and run the AppRun that's inside of it directly? Or that also fails?

Isn't lite-xl in your distro repo?

[–] [email protected] 2 points 3 months ago

Helix. It's modal like Vim but the defaults just work, and a quick "hx --health" will list every mode and what package you need to install for the language server.

[–] [email protected] 1 points 3 months ago (1 children)

By chimera Linux, do you mean the gaming one or this one?

Just curious

[–] [email protected] 1 points 3 months ago (1 children)

I meant the latter. I don't really like systemd and I loved FreeBSD for its simplicity but also can't use it on bare metal because of a lack of drivers, so this seemed like a great option.

[–] [email protected] 1 points 3 months ago (1 children)

Wow, it's actually daily driveable? Mind linking me the installation docs, I can't seem to find em...

[–] [email protected] 1 points 3 months ago (1 children)
[–] [email protected] 1 points 3 months ago (1 children)

Damn, I'm amazed at how pain-free the whole installation/setup process is. Everything sorta just worked. Though, I'm struggling a bit, trying to make zram service with dinit.

[–] [email protected] 1 points 3 months ago

I didn't setup zram but just went for a swap partition and specified it in fstab, so I'm not sure how that works really. There are a few issues open in GitHub about it but there seems to be no activity on them.

[–] [email protected] 1 points 3 months ago

I use VIM but I am not a Go developer

load more comments
view more: next ›