this post was submitted on 08 Sep 2023
78 points (97.6% liked)

3DPrinting

15541 readers
283 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: [email protected] or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago
MODERATORS
 

I made a 3d printable eReader case for my wife. Wanted to test what would happen if we water logged them and left them in the sun to dry.

Two of the cases are made from PLA while the other is made from PETG. They are all held together by thread and leather.

The test here is to see if moving from PLA to PETG was the right move since the last time I did this, the case turned into a banana.

My eventual plan once I've finished with my testing is to sell these cases and make their designs available for others to print.

you are viewing a single comment's thread
view the rest of the comments
[–] [email protected] 8 points 1 year ago (3 children)

Yeah ABS is super finicky to print, a temp controlled enclosure is mandatory and you often need perfectly prepped full adhesive plates with large print brims. But it's definitely the only true weather-tolerant plastic if you can get it to behave.

[–] the16bitgamer 4 points 1 year ago (1 children)

I think if I was ever at that point. I’d just use injection moulding

[–] [email protected] 6 points 1 year ago (2 children)

I just put a Amazon box over my printer, turned on brim, turned off part cooling and put glue stick over the print area! No warping from it! Did a lot of my voron parts like this before I built a proper enclosure!

It doesn't have to be anything super complicated, it just needs to keep the heat in

[–] [email protected] 3 points 1 year ago

I did the same when printing my Voron parts in ASA. I didn't use a glue stick and everything went pretty smoothly. I even put cardboard panels on my Voron while printing my magnetic panel clips, lol

[–] [email protected] 3 points 1 year ago

An Amazon box probably works really well as a free enclosure, but I'd worry about the fire risk. The enclosure I made I put a fire detector in just to be safe, making it out of paper would make me very paranoid.

[–] [email protected] 1 points 1 year ago (1 children)

ASA seems like an easier-to-print alternative to ABS, afaik only downsides are higher cost and fewer colours to choose from. Supposedly possible to print ASA without enclosure.

[–] [email protected] 1 points 1 year ago

Yes, ASA is a more stable plastic overall. They both have issues with requiring ventilated enclosures tho.

[–] [email protected] 1 points 1 year ago (1 children)

Honestly this is a bit extreme in my opinion. I have been printing ABS for some years now. It is what i print in the most in fact. I am using a prusa MK3 (now S) without a enclosure. and it works just fine even rather large prints. Only thing to keep in mind is the fumes. In my case the printer is in a separate room which is well ventilated.

[–] [email protected] 1 points 1 year ago (1 children)

It depends heavily on your printing base. If you have a plate you can glue/put ABS slurry to, you'll have enough adhesion that peeling is very unlikely to happen without an enclosure. If you're trying to print directly onto a textured or PEI sheet without an enclosure, it's gonna probably mess up.

[–] [email protected] 1 points 1 year ago (1 children)

In my case i do not use any sort of glue. I just print straight on the texured or PEI sheet. Never really hat issues. If it does not stick welll, I clean it with dishsoap. Seems to work best after a wile of use.

[–] [email protected] 1 points 1 year ago

Yes, if you're cleaning your build plate regularly you'll probably not need the glue. I've had to do it once for a very weird part that was wide but with a small cross section though, and if the environment is cool it can and still will want to peel away from the plate.