3DPrinting

17227 readers

279 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago

MODERATORS

[email protected]

Making a press mold, need some input (self.3dprinting)

submitted 2 weeks ago by ICastFist to c/[email protected]

9 comments fedilink hide all child comments

Pics https://ibb.co/album/sbjqwT (the weird triangle on the lower piece was fixed afterwards)

I've been messing around with a press mold so I can make hex tiles using paper mache, or something else that is easily and cheaply available.

The problem I've been having is with the sides, which rarely get properly pressed. What should I do to possibly fix this, regarding the model?

Right now, I've only experimented with minced paper and water, which led to satisfying results. What other things could I add or try for this kind of press? What could I apply on the mold to make the paper less likely to stick? Vaseline doesn't make a difference.

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 2 points 2 weeks ago

I made 3 part because I need some details on what will be the top of the piece, little seams to show the separation of each hex, as well as the thinner walls on the bottom. I did try 2 part molds before, but getting it off the mold was near impossible most of the time. Like this, I can just push the piece off.

Got it. I did't consider the extraction.

Currently, only the presser has holes for the water, should I add it to the bottom piece, too?

Not if it work well.

The thick walls are to endure the pressure and reduce warping, though maybe they could be thinner? I tested adding some gypsum to the mixture, waiting for one piece to dry further and already figured that I have to remove from the mold before it hardens too much, otherwise it’ll end up stuck (that or I have to properly sand/fill the pieces like bluewing said above)

If they endure the pressure they are ok. I would have done them thicker but just to be sure.

For the gypsym it seems strange, every time that I did something with it I had no problem to remove from the mold, expecially if it was made with some sort of plastic. Probably more than the pieces you need to sand the mold to have smooth surfaces, so that the gypsum does not adhere to it.