Satisfactory

1623 readers

29 users here now

The unofficial Lemmy community for Satisfactory, the factory-building and exploration game.

Useful Links:

Looking for Group?

@[email protected] started a dedicated server and welcomes Fediverse users, find out more by DMing them or joining this steam chat

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No NSFW content
No ads/spamming

founded 2 years ago

MODERATORS

[email protected]

Did they change pipe priority or something, I can't get water recycling to work anymore (self.satisfactory)

submitted 2 months ago by notnotmike to c/[email protected]

23 comments fedilink hide all child comments

Pre-1.0 I had aluminum factories that took the waste water from aluminum scrap and fed it back to the alumina solution refineries. However, in my new 1.0 world I can't seem to get it to flow correctly.

I've tried several solutions, including:

putting the waste water lower in the junction than the fresh water
adding a valve to the waste water to prevent backflow
adding a valve to the waste water to only supply the amount not provided by the fresh water

The only think I have not done yet is decrease the water extractor rates, mostly because I don't recall having to do that before when I used a valve.

Any tips? Anyone else had success in 1.0

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 3 points 2 months ago

I'm sure you've done this, but you'll want to make sure you're using all of the water being input based on calculations.

For instance, if you're making 100 m3/min and you need 400 m3/min for 100%. Then you'll need to limit fresh intake to 300 m3/min. However, if your refineries aren't running at 100% and maybe only using 300 m3/min then your waste won't be used to full capacity.

To counter this I tend to starve the system of water by limiting fresh and then bumping it up until max is reached.

It's a bit finicky, but seems to work for me.