Arduino

cross-posted from: https://lemmy.world/post/21224425

This was my first try developing my own pcb with the toner transfer method. I did this project many years back but it works perfectly to this day.

It filters an audio signal and drives led strips so they pulsate to the beat of a song.

I'm looking for Arduino discussions and there's plenty on Reddit but almost dead silence here.

Is this all there is?

Hello guys! While I am a relatively experienced programmer, I have practically zero experience on the hardware/electronics side of things. I really want and need (I'd like to work in embedded systems) to get this stuff in my "tool belt" of skills, but I am really worried that I will do something wrong or order the wrong parts because it is quite an old project I will be trying to build.

I would like to make this project (EDTracker github) so that i can play all my sim games that benefit from head tracking again. I had one which was pre-built but the connector broke. I would prefer a version with the magnetometer (9150 or 9250). The problem is that due to my inexperience I have no idea where to search for cheap(ish) components, or even if the components listed in the docs are still available or if there are better ones that do the same thing.

I realise this is not much (almost nothing) to go on, but I would really appreciate any help at all that can push me in the right direction. Also, please be understanding of my possibly ignorant questions. When you have no knowledge in a field it is often hard to know what the right questions are :)

Many thanks in advance!

Edit: Spelling

I have recently started working on my school project which involves writing some c++ for the ESP32. At school everything works fine, but at home only the first time I compile and upload the project (using the Arduino IDE), does it actually work correctly. So the communication is there, it just seems that the first compilation step does something to the program, as every time after that first compilation it refuses to compile. Here are the console outputs of the two compilations:

As you can tell, these error messages are not English, they are actually German. In the second compile step, they essentially say the following:

arduino-builder returned 2
Error during compilation of the Board ESP32 Dev Module

I am using Debian 12 (GNU/Linux) on my machine, but I don't think that this would be the issue, as I am clearly able to upload the project the first time around.

Has someone here experienced something like this before? I have looked online, and most sources say that the error code was one and not two, so this seems like a different issue.

Hey Made a script to aimbot in aimlab just to challenge myself with learning opencv and color detection. Feel free to use code for your own similar projects!

Code and circuit is here: https://www.circusscientist.com/monkey-detector-part-3-the-monkey-squirter/

cross-posted from: https://lemmy.world/post/10852531

Working on a joystick. Seems like any protocol I use to read from peripherals is going to be bottlenecked by having just one input. My microcontroller might have multiple ADCs, but there's just one processor stepping through them. Same for spi, or i2c, or uart. There's really only ever one sensor reporting back its data at a time.

I know this might not matter for measurement resolution. Especially if you're polling at like 115k serial or something, but...

That's 8 bits per axis, and three axis. Now that's at least 34 bits. To sample each axis we're down to only 4.5k samples per second. Plus whatever other cycles the controller has to handle... even if I spent half that time doing microcontrolle cycles at like 2k we're probably still well with the best star craft apms or whatever. I'd still like to find some way to really over engineer this thing.

I read a little about tdm, but that's out of my league and I don't know if you could even have 3 simultaneously signals that way

I'm thinking a microcontroller for each axis, and a usb port for each of them. So it appears like 3 different controllers to the computer. The user would just have to map the axis from the 3 controllers into 1 in their game software. I assume the steam remapping could do this.

Is it just going to get smashed back into one thread in the computer's usb hub anyway?

Any other suggestions?

Crossposted from: https://lemmy.ml/post/9698836

This setup allows Arduino to read temperature, control relay based on setpoints, display info on OLED screen, and manage date/time settings with user input through buttons. Adjust based on specific hardware/project requirements.

Designed to replace the faulty electronic control of a blue heat radiator.

Code and simulation at Wokwi

Licensed under GNU GPLv3.

I have previously used Arduino Leonardo as it supports the keyboard.h library that enables HID keyboard presses. The latest update of the library is from May 5, 2022. Anyone knows if the Uno rev 4 supports the keyboard library?

Hey all,

I've been sitting on a starter kit for a Mega 2560 R3 board and sensors for over a year. I want to get into it, so bad, but I frankly don't have the time to learn to code this with my job the way it is.

Is there a WYSIWYG program anyone favors, especially for someone new to Linux (I'm using a Raspberry Pi 3 Model B running Raspbian and I have a Raspberry Pi 4 Model B too) and Arduino (board model Mega 2560 R3)?

I found these options. Anyone have experience with them?

Visuino

Embrio

Hey all,

I've been sitting on a starter kit for a Mega 2560 R3 board and sensors for over a year. I want to get into it, so bad, but I frankly don't have the time to learn to code this with my job the way it is.

Is there a WYSIWYG program anyone favors, especially for someone new to Linux (I'm using a Raspberry Pi 3 Model B running Raspbian and I have a Raspberry Pi 4 Model B too) and Arduino (board model Mega 2560 R3)?

I found these options. Anyone have experience with them?

Visuino

Embrio

(me again) i’m trying to use both WIFI-AP, DO and SPI. But my wifi is not properly working when i let everything run at maximum (required) speed.

TLDR; Seems that pins D1 and D2 interfere with WIFI, but why?

i have a NodeMCU ESP8266 V3 ‘wemos’ variant. (it doesn’t have the ESP-12E board integrated) https://makerselectronics.com/product/wemos-nodemcu-v3-esp8266-340g-wifi-module-with-extra-memory-32m-flash

in setup() i have

  WiFi.softAP(ssid, password);

  IPAddress myIP = WiFi.softAPIP();
  Serial.print("AP IP address: ");
  Serial.println(myIP);

  server.on("/", handleRoot);
  server.on("/set_config", handleForm);
  server.onNotFound(handleNotFound);
  server.begin();
  ..
  t=D1;pinMode(t, OUTPUT); digitalWrite(t, LOW);
  t=D2;pinMode(t, OUTPUT); digitalWrite(t, LOW);
  t=D3;pinMode(t, OUTPUT); digitalWrite(t, LOW);

What i'm seeing;

if i have a main loop() with only

• while (Serial.available()){ .. }
• server.handleClient();

Then i can see the AccessPoint and i can connect to it with my Android phone.

When i add code running once every 100 msec

• Debug setting set to MAX debug info to Serial
• using pins D1,D2,D3 for output (to LED screen)
• using D5,D7 for SPI, (to LED screen)
• having SPISettings(15000000, MSBFIRST, SPI_MODE0)
• taking total 60 up to 74 microseconds

Then i do see the WIFI AP, and i CAN connect with the WIFI AccessPoint. (But my LED display is flickering)

When i change the code to running once every 10 msec

• // same as before

Then i CAN connect with the WIFI AccessPoint (But my LED display is flickering)

When i change the code to running once every 10 msec

• Debug setting off
• using pins D1,D2,D3 for output
• using D5,D7 for SPI
• taking total 60 up to 74 microseconds

Then i CAN connect with the WIFI AccessPoint (But my LED display is flickering)

When i change the code to running once every 1 msec

• Debug setting None + Debug to serial
• using pins D1,D2,D3 for output
• using D5,D7 for SPI
• taking total 60 up to 74 microseconds

Then i do see the WIFI AP, but i CAN'T connect with the WIFI AccessPoint (But my LED display is showing a steady picture)

When i change the code to running once every 1 msec

• Debug setting None + Debug disabled
• using pins D1,D2,D3 for output
• NOT using D5,D7 for SPI
• taking total 30 up to 40 microseconds

Then i do NOT see the WIFI AP?!

When i change the code to running once every 1 msec

• Debug setting None + Debug disabled
• NOT using pins D1,D2,D3 for output
• using D5,D7 for SPI
• taking total 50 up to 70 microseconds

Then i CAN connect with the WIFI AccessPoint?!

Seems one of the pins D1,D2,D3 is interfering with WIFI..

instead of using D1,D2,D3, i changed all I/O to only use D1. Then the WIFI AP does not show up in the WIFI networks.

instead of using D1,D2,D3, i changed all I/O to only use D2. Then the WIFI AP does not show up in the WIFI networks.

instead of using D1,D2,D3, i changed all I/O to only use D3. Then the WIFI AP does show up in the WIFI networks. And i can connect to it.

So my question is; Seems that pins D1 and D2 interfere with WIFI, but why?

cross-posted from: https://lemmy.world/post/2463460

I took a WaveShare RP2040-Touch-LCD-1.28and made a program to use it as a touchscreen. This is still very much in the beta phase but the proof of concept works. Here’s my GitHub repo for it.

I’m planning on integrating it into my next split near the thumb cluster.

I know this is MicroPython, but I was having the same issue through Arduino. The IMU on the WaveShare 1.28 module has a fusion engine but I can’t seem to access it via I2C. More detail in the SO post linked.

Project was to display tide information (time and height) on an LED panel. Fingers crossed the image loads!

OK, it's not an Arduino as such, it's an ESP32, but I programmed it on the arduino IDE. I get the time from an NTP time server and tide data from an API. A bit of messing around with daylight savings times and I display the next four tides on the Hub75 LED matrix. Date and clock is shown on the other side. Every 24 hours I pull new data down and sync the clock.

The good: It works as planned.

The bad: API keys and wifi creds are all hard coded so will need a firmware update if either change. Don't think I have sufficient pins left to allow me to read from an SD card.

The ugly: The wiring behind it is not beautiful. The code could do with a review and tidy. - Maybe even a bit of error handling wouldn't go amiss. Red and Blue are a bit jarring so close together and the blue is a bit swamped , especially when the brightness is turned down.

I may make an enclosure to keep it all together and keep the dust off and add a pir sensor to turn the display off when there's no movement. Or I may get bored and dismantle it!

I made a thing. A while ago I set up a raspberry pi to log data from a couple Arduino based sensor sensors I made.

Now I made a control panel type thing, which can show data values via the 4x7 digit display, show what is it displaying via the 6 leds, can send information using the r reader which is enabled/changed via a key switch.

Powered by an Arduino nano (made by grove) and communicates with the server through usb serial.

I am quite happy with it (eventually I'll bother to replace the tape with glue)

Modules, chips, and everything in between! What are your favorite sensors?

Modules, chips, and everything in between! What are your favorite sensors?

I did this with a small Arduino uno kit

Seems like a beast to me! I've been thinking of using it for a DIY drums project that needs a lot of analog reads and processing per second.

While not quite Arduino, I have an ESP32 (Arduino IDE) project to pull tide data via API and show it on a HUB75 led matrix. I've got most of the parts working separately but not quite got them all together yet. What is everyone else doing?

While not quite Arduino, I have an ESP32 (Arduino IDE) project to pull tide data via API and show it on a HUB75 led matrix. I've got most of the parts working separately but not quite got them all together yet. What is everyone else doing?

I've been here for a couple of weeks or so checking things out. So far so good. Since it looks like we're doing this I wanted to say hi to everyone who's migrating or just perusing.

All the Best!

ripred

Visiting here from Reddit's r/arduino before the June 12th blackouts. Really liking how Lemmy operates but notice the Arduino community here is less than sparse. Given time, hopefully we can build this community for Arduino enthusiasts who are displeased with Reddit as a platform. I hope to see this place grow over time!

I haven't been a part of the Arduino subreddit for very long - but I've never seen "Africa" performed with stepper motors before! If nothing else, check out the post lower in this community!

While looking into why a stepper motor sometimes makes a sound while stopped, I found.... stepper motor music covers!