RossoErcole

joined 1 year ago
[–] [email protected] -2 points 10 months ago* (last edited 10 months ago)

Ireland is the self-determination of the Irish people, it doesn't make it less democratic, but it still is a cultural product of Irish people. The same question regarding the United States is more complex, as it was a mix of immigrants from differents parts of Europe in the beginning, that rebelled against England, which I think can be seen as a self-determination for them, and in some ways an act of creation of a new peoplehood. But quite different from traditional peoplehood, because it's a peoplehood founded by new immigrants which have less in common, probably making it more volatile and/or open to change?

Therefore no to the first question, as these selfdeterminations are of other peoplehoods, and they aren't cultural products of the jewish people.

By homeland I refer to the land where the jewish people was born and is attached to, so yes I'm referring to Israel. Some zionists in the beginning were willing to forgo Israel and make a "temporary" state/autonomous region in some other place, in order to create a safe heaven for jews that were escapign persecutions (as this at the time was an impelling need), and that would politically fight for them at the geopolitical level. But forgoing Israel was never really accepted by the majority of the zionist movement, because it was the only place for which the jewish people would band togheter, and actually manage to self-determine.

I think that the way that the state of Israel was born was also (and not only) due to the Arab and Palestinian unwillingness to accept the jewish population, which in the beginning didn't even want a state. Actually the zionist current of Netanyauh comes from here and it's called Revisionist Zionism, it was a minority of the zionist movement. It was founded by Jabotinsky (not an admirable individual by many metrics, but some statments are worringly moderate if compared to Netanyauh), they wanted the creation of the state to be a main focus of zionism and for the state to be on both banks of Jordan, later expansionism became less of a focus. The idea of a state later did became more central to zionism because of growing tensions with the Arab populations and the inability of jewish and palestinian leaderships to find a way to coexist.

[–] [email protected] -2 points 10 months ago

Well, first I think it's wise to point out that the answer by @Dreamer was already talking about "any wing zionists" therefore leftwing zionists would fall under that (I disagree on the consideration that was done afterwards, but I think we agree on the existence of these people). Zionism is a liberation movement of the Jewish people, I think it's important to understand this, jews are a people before being the followers of a religion (I'm myself an agnostic jew). The view that judaism is only a religion is originally a Christian/Western perspective.
Peoplehoods have a right to self determine, the problem arises when a peoplehood doesn't have a specific land to selfdetermine in. Most Jews didn't inhabit the land that they considered their homeland, (not everybody considered it their homeland in the same way), but the only place that would resonate with the jewish people enough to band togheter in order to achieve a self determination that could make us capable of avoiding persecutions, was Israel. Reality proved this to be right, when mass emigrations started to happen, to escape persecutions in Europe (before the Shoa), one of the main destinations for jews, in search of a better future, was Israel.

I don't think jewish liberation needs to come at the cost of the palestinian people, but that doesn't make me want less to have a self determination for my people. I think there is space in that land for two peoples.

[–] [email protected] 2 points 10 months ago

me too, but it still didn't work. :/

[–] [email protected] 1 points 10 months ago

yeah it showed on lspci but not on rfkill. It reset by itself at a certain point, dunno how or why.

[–] [email protected] 1 points 10 months ago

I too have the Intel card because the killer one had shitty software, how do I shut down fastboot fully???

[–] [email protected] 1 points 10 months ago

didn't register the wifi, after a few attempts with a live usb stick (where the same thing happened, so no fix there), I got back into the mint installation and it worked

[–] [email protected] 1 points 10 months ago

it's a laptop :(

[–] [email protected] 4 points 10 months ago (2 children)

it didn't work, but after a bit it started working again, pretty wild

 

Yesterday night I had a problem with a usb port and the touch pad not working, I restarted the system a few times and switched back and forth with windows (which is installed on a different drive), they didn't work even there.After a few restarts the usbport and the touch pad came back to life, but the wifi stopped working. When I type wifi in the terminal I get: wifi = none (no device)
This time the problem is only on linux though.

Where/What should I check?

System Info:

spoiler
System:
Kernel: 5.15.0-91-generic x86_64 bits: 64 compiler: gcc v: 11.4.0 Desktop: Cinnamon 5.8.4
tk: GTK 3.24.33 wm: muffin dm: LightDM Distro: Linux Mint 21.2 Victoria base: Ubuntu 22.04 jammy
Machine:
Type: Laptop System: Micro-Star product: GS65 Stealth Thin 8RF v: REV:1.0
serial: <superuser required> Chassis: type: 10 serial: <superuser required>
Mobo: Micro-Star model: MS-16Q2 v: REV:1.0 serial: <superuser required>
UEFI: American Megatrends v: E16Q2IMS.112 date: 05/21/2019
Battery:
ID-1: BAT1 charge: 52.4 Wh (65.3%) condition: 80.3/80.3 Wh (100.0%) volts: 16.5 min: 15.2
model: MSI BIF0_9 serial: N/A status: Charging
CPU:
Info: 6-core model: Intel Core i7-8750H bits: 64 type: MT MCP arch: Coffee Lake rev: A cache:
L1: 384 KiB L2: 1.5 MiB L3: 9 MiB
Speed (MHz): avg: 900 min/max: 800/4100 cores: 1: 900 2: 900 3: 900 4: 900 5: 900 6: 900
7: 900 8: 900 9: 900 10: 900 11: 900 12: 900 bogomips: 52799
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
Device-1: Intel CoffeeLake-H GT2 [UHD Graphics 630] vendor: Micro-Star MSI driver: i915
v: kernel ports: active: eDP-1 empty: DP-1,HDMI-A-1 bus-ID: 00:02.0 chip-ID: 8086:3e9b
Device-2: NVIDIA GP104M [GeForce GTX 1070 Mobile] vendor: Micro-Star MSI driver: nvidia
v: 535.129.03 pcie: speed: 2.5 GT/s lanes: 16 ports: active: none empty: DP-2,HDMI-A-2
bus-ID: 01:00.0 chip-ID: 10de:1ba1
Display: x11 server: X.Org v: 1.21.1.4 driver: X: loaded: modesetting,nvidia
unloaded: fbdev,nouveau,vesa gpu: i915 display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 98
Monitor-1: eDP-1 model: AU Optronics res: 1920x1080 dpi: 142 diag: 394mm (15.5")
OpenGL: renderer: Mesa Intel UHD Graphics 630 (CFL GT2) v: 4.6 Mesa 23.0.4-0ubuntu1~22.04.1
direct render: Yes
Audio:
Device-1: Intel Cannon Lake PCH cAVS vendor: Micro-Star MSI driver: snd_hda_intel v: kernel
bus-ID: 00:1f.3 chip-ID: 8086:a348
Device-2: NVIDIA GP104 High Definition Audio driver: snd_hda_intel v: kernel pcie:
speed: 2.5 GT/s lanes: 16 bus-ID: 01:00.1 chip-ID: 10de:10f0
Sound Server-1: ALSA v: k5.15.0-91-generic running: yes
Sound Server-2: PulseAudio v: 15.99.1 running: yes
Sound Server-3: PipeWire v: 0.3.48 running: yes
Network:
Device-1: Qualcomm Atheros Killer E2500 Gigabit Ethernet vendor: Micro-Star MSI driver: alx
v: kernel pcie: speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 3d:00.0 chip-ID: 1969:e0b1
IF: enp61s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Device-2: Intel Wireless-AC 9260 driver: iwlwifi v: kernel pcie: speed: 5 GT/s lanes: 1
bus-ID: 3e:00.0 chip-ID: 8086:2526
Bluetooth:
Device-1: Intel Wireless-AC 9260 Bluetooth Adapter type: USB driver: btusb v: 0.8 bus-ID: 1-14:4
chip-ID: 8087:0025
Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 3.0 lmp-v: 5.1
sub-v: 100
Drives:
Local Storage: total: 1.38 TiB used: 220.24 GiB (15.6%)
ID-1: /dev/nvme0n1 vendor: Kingston model: SA2000M81000G size: 931.51 GiB speed: 31.6 Gb/s
lanes: 4 serial: <filter> temp: 29.9 C
ID-2: /dev/nvme1n1 vendor: Samsung model: MZVLB512HAJQ-00000 size: 476.94 GiB speed: 31.6 Gb/s
lanes: 4 serial: <filter> temp: 40.9 C
Partition:
ID-1: / size: 106.75 GiB used: 39.66 GiB (37.2%) fs: ext4 dev: /dev/nvme1n1p1
ID-2: /boot/efi size: 296 MiB used: 31.8 MiB (10.7%) fs: vfat dev: /dev/nvme0n1p1
ID-3: /home size: 361.45 GiB used: 180.55 GiB (50.0%) fs: ext4 dev: /dev/nvme1n1p2
Swap:
ID-1: swap-1 type: file size: 1.42 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: 55.0 C pch: 46.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Packages: 2796 apt: 2746 flatpak: 50
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
1: deb [signed-by=/usr/share/keyrings/brave-browser-archive-keyring.gpg] https: //brave-browser-apt-release.s3.brave.com/ stable main
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http: //linux-mint.froonix.org victoria main upstream import backport
2: deb http: //mirror2.tuxinator.org/ubuntu jammy main restricted universe multiverse
3: deb http: //mirror2.tuxinator.org/ubuntu jammy-updates main restricted universe multiverse
4: deb http: //mirror2.tuxinator.org/ubuntu jammy-backports main restricted universe multiverse
5: deb http: //security.ubuntu.com/ubuntu/ jammy-security main restricted universe multiverse
No active apt repos in: /etc/apt/sources.list.d/spotify.list
Active apt repos in: /etc/apt/sources.list.d/syncthing.list
1: deb [signed-by=/usr/share/keyrings/syncthing-archive-keyring.gpg] https: //apt.syncthing.net/ syncthing stable
Active apt repos in: /etc/apt/sources.list.d/trebelnik-stefina-grub-customizer-jammy.list
1: deb [arch=amd64 signed-by=/etc/apt/keyrings/trebelnik-stefina-grub-customizer-jammy.gpg] https: //ppa.launchpadcontent.net/trebelnik-stefina/grub-customizer/ubuntu jammy main
Info:
Processes: 370 Uptime: 1h 40m Memory: 15.46 GiB used: 5.53 GiB (35.8%) Init: systemd v: 249
runlevel: 5 Compilers: gcc: 11.4.0 alt: 11/12 Client: Cinnamon v: 5.8.4 inxi: 3.3.13

[–] [email protected] 2 points 10 months ago* (last edited 10 months ago)

It was but it got reenabled, I disabled it again but it still doesn't work damn. I'll post the Intel I gathered on the Linux mint forum (I did in the past but now I have more information)

[–] [email protected] 1 points 10 months ago

@trashxeos I'm kind of lost, did you have any luck looking trough the logs of journalctl?

[–] [email protected] 1 points 10 months ago (2 children)

I've tried. After suspension but before modprobe the wifi is not available, after modprobe it is there, but is disabled and cannot be enabled.

 

Hi, this is a long lasting problem that I didn't really manage to fix when I started using linux (Mint, Cinnamon). But now that I've been using it regularly for half a year and I have more experience in fiddling around, I'm trying to get it resolved.

Whenever I suspend the laptop (or close the lid, which does it automatically) the Wifi and sometimes an external monitor don't work anymore, I don't know what the problem is. The wifi is fixed by powering on and off again. To fix the monitor sometimes even powering off and on again didn't fix it, I usually waited for the next day and it worked again.

I've no idea of how to fix this (Linux Mint forums didn't help at the time)

Laptop is an MSI GS65-Stealth-Thin-8RF running Linux Mint, with Cinnamon Desktop

journalctl output: https://sharetext.me/q7eo87psmq

System Details


System:
Kernel: 5.15.0-91-generic x86_64 bits: 64 compiler: gcc v: 11.4.0 Desktop: Cinnamon 5.8.4
tk: GTK 3.24.33 wm: muffin dm: LightDM Distro: Linux Mint 21.2 Victoria base: Ubuntu 22.04 jammy
Machine:
Type: Laptop System: Micro-Star product: GS65 Stealth Thin 8RF v: REV:1.0
serial: <superuser required> Chassis: type: 10 serial: <superuser required>
Mobo: Micro-Star model: MS-16Q2 v: REV:1.0 serial: <superuser required>
UEFI: American Megatrends v: E16Q2IMS.112 date: 05/21/2019
CPU:
Info: 6-core model: Intel Core i7-8750H bits: 64 type: MT MCP arch: Coffee Lake rev: A cache:
L1: 384 KiB L2: 1.5 MiB L3: 9 MiB
Speed (MHz): avg: 941 high: 1025 min/max: 800/4100 cores: 1: 913 2: 875 3: 1025 4: 867 5: 952
6: 911 7: 979 8: 921 9: 966 10: 994 11: 904 12: 988 bogomips: 52799
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
Device-1: Intel CoffeeLake-H GT2 [UHD Graphics 630] vendor: Micro-Star MSI driver: i915
v: kernel ports: active: eDP-1 empty: DP-1,HDMI-A-1 bus-ID: 00:02.0 chip-ID: 8086:3e9b
Device-2: NVIDIA GP104M [GeForce GTX 1070 Mobile] vendor: Micro-Star MSI driver: nvidia
v: 535.129.03 pcie: speed: 2.5 GT/s lanes: 16 ports: active: none empty: DP-2,HDMI-A-2
bus-ID: 01:00.0 chip-ID: 10de:1ba1
Network:
Device-1: Qualcomm Atheros Killer E2500 Gigabit Ethernet vendor: Micro-Star MSI driver: alx
v: kernel pcie: speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 3d:00.0 chip-ID: 1969:e0b1
IF: enp61s0 state: down mac: <filter>
Device-2: Intel Wireless-AC 9260 driver: iwlwifi v: kernel pcie: speed: 5 GT/s lanes: 1
bus-ID: 3e:00.0 chip-ID: 8086:2526
IF: wlp62s0 state: up mac: <filter>
Bluetooth:
Device-1: Intel Wireless-AC 9260 Bluetooth Adapter type: USB driver: btusb v: 0.8 bus-ID: 1-14:3
chip-ID: 8087:0025
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 3.0 lmp-v: 5.1
sub-v: 100

20
submitted 10 months ago* (last edited 10 months ago) by [email protected] to c/[email protected]
 

Hi, I'm not the most expert user, but I've been messing with my latest linux install for a few months. I costumized the look of the GRUB, but whenever the kernel gets updated and the grub.cfg gets regenerated, the classes of two entries do not generate (efi and submenu), leaving the entries with no icons (which are determined by the class of the entry).

How do I make it so they automatically generate, instead of me modifing the .cfg everytime the kernel is updated?

I'm on linux mint, 21.2 Cinnamon.

 

Hi, I've kind of stopped using kbin, the reason being that every time I go on this website, it asks me to relog in, even though I've selected remember me last time that I did log in.

I use a home made password manager so the password is complex and I don't remember it straight away, making it quite annoying. Is this a common problem? I have it both on the phone and on my PC, in one I use the duck duck go browser, in the other I use brave

view more: next ›