If you like experimenting with aeropress recipes I highly recommend the Aeromatic app.
In actual practice, I usually brew inverted, 3 minute steep, grinder settings don't translate, and I measure the beans by volume.
this post was submitted on 07 Jul 2023
23 points (89.7% liked)
Coffee
8367 readers
1 users here now
☕ - The hot beverage that powers the world!
Coffee gadgets - It's always great to learn about new gadgets. Please share your favorite hardware or full setups. It might inspire newcomers to experiment!
Local businesses - Please promote your local businesses. If you are not the owner of the business you are promoting, kindly ask the owner if it's okay. It would be great if the business has a physical store to include an exterior or interior shot.
founded 1 year ago
MODERATORS
That’s a new app to me, hadn’t heard of it! Will check it out!
Aaand immediate install.
Thanks for the recommendation, this will help me greatly.
Oh my, just checked that app out. I found Lukas Zahradnin's WAC2015 recipe. Tried it out and oh my did it make the light roast Burundi delicious. Thank you!
I was going to recommend this app as well. The built in timer function is a godsend! Also love all the different recipes and that you can take notes in-app! It was a definite game changer for me when I want to mix things up.
Wow nice , I haven't heard about this app
What temp?
High for Aeropress: usually around 205F, but lower for lighter roasts.
When I first got the Aeropress I experimented a bit. All good fun, but in the end I have settled on following basically Hoffmann's recipe. It is easy to remember, easy to perform, and produces consistently yummy results.
Instead of spending time finding other recipes, I would focus on finding better coffee beans.
I buy what I think are good beans. I only buy whole beans, grind at home, and tend to get ones that are locally roasted.
Just tried Lucas Zahradnin's recipe from 2015 and it worked so well with the Burundi light roast I had at home. He recommends Kenya but any high density washed coffee works well:
-
Inverted method
-
20g finely ground, 5 clicks on the porlex mini... I did it with 8 by mistake but it turned out delicious, I just like having some acidity in my mug.
-
230ml of water at 80°C. I make my own barista water since the one from the tap is liquid limestone here Recipe for the water.
-
Rinse filter and preheat. I do it over running boiler water from the tap.
-
Add the coffee to the chamber.
-
Pour 60ml of water.
-
Wiggle the AeroPress for 15 seconds to mix the water and grounds.
-
Pour another 170ml of water.
-
Fasten the filter cap, flip, press for 30 seconds.
Mmm, sounds tasty!
If you continue on with the inverted method, please remember to post a pic when you get your inevitable first mess!
Mine happened when I flipped my aeropress over with the cap not fully screwed on, so I basically fling hot coffee and grounds all over the room 🙃
ahh.. I remember my first. I also, strangely enough have had way more v60 topples. From brewing on a hike or general clumsiness
My first mess actually happened doing standard method… I was being dumb and using a mug that did not fit the aeropress… so the aeropress was delicately balancing on top, until it wasn’t 😂 I’ve since upgraded to the prismo and better mugs
For one cup:
16g beans, medium grind. Set water to 212F in kettle.
Invert aeropress, plunger to level 4. Add ground beans.
Add twice the bean weight in water, wait 30 seconds for bloom.
Add more water until total water weight is 200g. Wait until timer hits 2min (including bloom)
Flip the aeropress back over onto a cup. Depress the plunger over the course of around 30sec (should be empty at 2:30 mark on timer).
Often I'll add a splash of hot water to the cup at that point for a bit of dilution.
Thanks for the reply, will have to try it out sometime!
I use my aeropress to make fairly tea-like coffee so not so many beans (about 13g), medium grind, not inverted, minimal agitation - just a quick swirl - and brew for about two minutes, and enough water to make the whole cup (about 250ml). I make sure the water is boiling though so I still get a decent extraction.
Sounds pretty similar to how I usually make it! I fill all the way up past the 4 though and usually btw for 3 mins so I get a pretty decent extraction from it.
I picked up an Aeropress and a decent grinder last week. So this post is incredibly timely for me.
I have espresso roasted beans, so it's been quite difficult to prevent over extraction, but I have had some decent cups out of it already.
Keen to follow some of these recipes and work out what works best.
Glad you found it useful! Just happy to make a contribution! :)
For a long time I’ve been using the James Hoffman method. If you’re curious, check him out on YouTube. He’s got an entire series on the aeropress and it’s great!
I have been watching Mr Hoffman, he is great!
Tried his method with my current beans, I think they are too darkly roasted for the brew time, comes out very bitter.
Looking to pick up something lightly roasted for my next bag.
You might have some luck adjusting your temperature or making your grind courser for those dark beans. Hotter water and finer grind will both increase your extraction rates and with a dark roast, it’s easier to pick up the bitterness.
Beside the convenience of machine-brewed coffee I found the aeropress to be an extremly forgiving brewer. I can't remember ever making bad coffee with it (though I'm a taste barbarian, I enjoy strong flavors, but fine nuances are lost to me, so YMMV). As such my "recipe" is dirt-simple an can be done before having coffee (that circular dependency is always a problem with other methods).
- I have that Fellow Prismo thingie, so need to mess around with brewing inverted
- I usually add a paper filter to the metal filter, but more for cleanup reasons than taste
- 15g beans, finely ground but not quite espresso-fine
- Quickly add 100ish grams of boiling water
- stirr
- fill up to 250g water total
- put on the plunger
- wait about 2-3 minutes, plunge & enjoy
For my friend, or if I'm feeling the occasionly sweet tooth myself, I do basically the same just with 125g total water (can be added in one go, I only stirr after 100 above as it is easier and less prone to make a mess if you are too vigorous) The "missing" 125g of water are then replaced with 125g of milk (or a milk-replacement of your choice) + 5g (or 10 for the espially sweet toothed) sugar that receive the nanofoamer treatment
But as I said the Aeropress is extremly forgiving, you can diverge from the recipe quite a bit and still get good coffee. Sometimes I'm distracted and only come back to plunge after 8 minutes and the coffee is still good. Spoon was too full and now its 16g? No need to pick beans out of the grinder, that'll work too. If you have a feeling for measurements (I don't) you can just eyball that stuff and not sweat the details
Sounds like a great recipe, will have to give it a shot!
How are you able to get 250g of water in? I only was able to fit about 225 with 15g of grounds.
Are you breweing inverted? That'll loose you some capacity. If you have very fresh beans it might also help to wait a little longer after stirring for the CO2 to get out and not have too much foam on top
I’ve tried both but since I don’t have a prismo, if I’m brewing normal I try to get the plunger on ASAP so I don’t loose too much water. Instead I skip the stirring if I’m making it for myself, let it steep and then give it a little jostle 30 sec or so before ready to plunge.
Yeah, I guess without the prismo you either have to accept a little "loss" at the start of brewing or less water. Shouldn't make a huge difference either way though
Yeah, I think you’re right. A little loss doesn’t kill the overall quality of it!