this post was submitted on 07 Nov 2024
36 points (97.4% liked)

Shitty admin

187 readers
8 users here now

Welcome to Shitty Admin!

This community is for shit posting about terrible things computer admin do. Cross posts are welcome and so is satire.

Please no politics or harmful content

founded 2 weeks ago
MODERATORS
 

I promise you this is a legitimate question. I have been trying to find an easy path to route networking from my basement where the network gear is to the second floor of my house. Problem is I cannot find a clear route - except for one of the drains for the second floor toilets. It’s basically a straight stack directly upstairs.

How realistic is it to route the cable up through the plumping and then out of the toilet upstairs? Obviously I would not have the cable exit the bowl that would not make much sense but I think I could catch it the other end, and then route it upstairs. I would just need to drill an entry hole for the cable in the drain downstairs and then just push it up.

I could probably convince my wife we don’t need the spare bathroom upstairs so it’s not like the toilet will be used much or at least restrict it to non solids use to not cause issues.

How realistic is this? I don’t think a toilet flush would cause too much pressure on the entry hole downstairs, I’d seal it too with silicone or something. I’m really convinced this is doable.

reddit

top 19 comments
sorted by: hot top controversial new old
[–] [email protected] 43 points 2 weeks ago (1 children)

No, it is not possible. The ethernet cable sends 0's and 1's, but the toilet line can only send 1's and 2's. All your 0's and 2's will just get stuck.

[–] [email protected] 9 points 2 weeks ago

Couldn't I just do n-1

[–] [email protected] 13 points 2 weeks ago* (last edited 2 weeks ago) (1 children)

Since you tagged this as serious... Is the plumbing in a chase? That would probably be a better route.

I could probably convince my wife we don’t need the spare bathroom upstairs so it’s not like the toilet will be used much or at least restrict it to non solids use to not cause issues.

Aside from probably not conforming to code, this should be a tough sell. The function of a toilet is straight forward and doesn't involve restrictions due to communication cabling.

Have you considered running a second router as an AP or moving your networking gear to the main level? Either are probably less involving.

[–] [email protected] 8 points 2 weeks ago (1 children)

I think the best option is to just put an AP in every toilet. Just have the cable come right out of the bowl.

[–] [email protected] 6 points 2 weeks ago

That'll never work--the bowl will end up working like a dish and you'll only be able to communicate with stuff directly above the bowl.

Instead, install the APs inside the water tank.

[–] [email protected] 12 points 2 weeks ago (1 children)

Got cable tv? Coax to ethernet converters.

[–] [email protected] 12 points 2 weeks ago

That's not very shitty

[–] [email protected] 8 points 2 weeks ago (1 children)

this was a Google April fools joke like 12 years ago

[–] [email protected] 7 points 2 weeks ago (1 children)

An outdoor rated cable would probably survive. You’ll need to seal that hole up really tightly though or sewer gasses will leak in

[–] [email protected] 7 points 2 weeks ago (1 children)

Maybe just leave the AP in the bowl

[–] [email protected] 6 points 2 weeks ago

New definition of shit posting

[–] [email protected] 5 points 2 weeks ago

You can take advantage of the existing infrastructure in your house with a PL adapter (poop line adapter).

[–] [email protected] 5 points 2 weeks ago (1 children)

one floor at a time. you surely can find somewhere get a cable up to the main level through just the basement ceiling and floor above it. from there, maybe you have to go along a wall or around a room to find the easier path to go up from there to upstairs.

other alternatives: running a suitable cable outdoors along the side of the building, using wifi just to go from one floor to the next if it isn't reaching the entire height of the building in one shot, or ethernet over powerline hardware.

[–] [email protected] 3 points 2 weeks ago* (last edited 2 weeks ago)

Nah, sewage pipes are the right answer. That way you can send the log down the line

[–] [email protected] 5 points 2 weeks ago (1 children)

If you can run it in and out of the pipe, why not simply outside of the pipe, next to the pipe?

[–] [email protected] 2 points 2 weeks ago (1 children)

Because you just shove one end of the cable in the toilet and flush. The CAT5 pulls itself that way, smarty-pants.

[–] [email protected] 2 points 2 weeks ago

Hahaha, nice. Ez pz lemon squeezy.

[–] [email protected] 4 points 2 weeks ago

Shitty solution for this issue.

Ticket closed