this post was submitted on 15 Oct 2024
100 points (98.1% liked)

Bicycles

3063 readers
195 users here now

Welcome to [email protected]

A place to share our love of all things with two wheels and pedals. This is an inclusive, non-judgemental community. All types of cyclists are accepted here; whether you're a commuter, a roadie, a MTB enthusiast, a fixie freak, a crusty xbiking hoarder, in the middle of an epic across-the-world bicycle tour, or any other type of cyclist!


Community Rules


Other cycling-related communities

founded 1 year ago
MODERATORS
 

I wanted to share my experience with waxing my bike chains.

I was resistant to waxing my chains because it seems that a lot of people felt it was "too much work".

But having to constantly clean black shit off my chains after every ride, then spend time degreasing and re-lubing, I figured I'd try waxing when I got my gravel bike.

Now, thousands of KM later and having converted all three bikes to waxed, there's no way I'd go back. The time saved could be measured in hours per month.

First, the biggest complaint is chain prep. Yeah, regardless if you're waxing or not, you'll need to prep a new chain by removing the factory grease. With waxed, you do this once, and no more worrying about degreasing ever again. Make like easy and get Silca's chain stripper, and it's a 10 minute, one-step process.

Ongoing chain maintenance couldn't be easier. After every ride, give the chain a quick wipe (or not). My chain stays clean, even after a 200 km ride.

And if you ride in wet or dirty conditions? Guess what, you're in for a LOT of work if you lube your chain. With waxed, keep a second (or third) chain ready to go, and you just swap it out (10 seconds of effort). Take the dirty chain, give it a wipe if it's only been wet, or pour boiled water onto it if you want to "reset" the chain to bare metal. Then drop it into the waxing pot for a re-wax. You don't have to stand at the pot, so there's no real time commitment here. I've spent more time completely dirtying large microfiber cloths trying to get my chain "clean" when lubed (hint: it's never clean if you use a wet lube, not without solvents and an ultrasonic cleaner).

For actual immersion wax, I do it every 1000 km (sooner than you need to), and use a drip wax every 200 - 250 km to keep things fresh.

Honestly, wax is easier, cleaner, and takes less time to maintain vs wet lube.

The only downsides? The initial cost to get started. But this is offset by not having to replace chains or other components prematurely. You actually save money in the long-term when using waxed chains.

Some might argue that "you can't run waxed chains in muddy or constantly rainy conditions". Well, at the same time, your wet lube isn't really helping matters in those situations, either. Waxed is still better, and you can swap chains much faster than you can clean the grinding paste from a wet lubed chain.

Who would I not recommend waxed chains to? Someone who rarely uses their bike. Drip lube will be "good enough" in those cases. But anyone else would benefit from waxing their chain.

(page 2) 30 comments
sorted by: hot top controversial new old
[–] [email protected] 1 points 1 day ago

My chain maintenance takes about 2 minutes: soak it with some cheap multipurpose oil and wipe off the excess with an oily rag. I repeat this once every 2 weeks or so and it has worked good enough so far. When it's extra wet outside and my bike is covered in mud when I get back home I usually go thru it with an garden sprayer filled with hot water. Then I add the extra step of drying the chain with compressed air and re-lube it for storage after every ride.

[–] [email protected] 3 points 1 day ago (1 children)

The SILCA strip chip does a great job of eliminating the need for chain prep. Worth the extra cost, if you don’t want to mess around with harsh chemicals.

Waxed chains are the bees knees. I’ll never go back to using lube.

[–] [email protected] 1 points 1 day ago

The SILCA strip chip does a great job of eliminating the need for chain prep. Worth the extra cost, if you don’t want to mess around with harsh chemicals.

I actually ordered some, realized that the slow cooker I was using couldn't get to the right temperature for it, and sent it back.

It would have been easier, for sure. But the Chain Stripper is also really easy and can be reused. I'll probably never run out, considering that I may only need to use it once every few years (per new chain). LOL

[–] [email protected] 3 points 1 day ago (1 children)

I used to thin paraffin wax with xylene just enough to make a solution that stays liquid and apply it to the chain from an old chain oil dripper bottle. If applied liberally it flushes out what little dirt has accumulated on the chain and after a quick wipe you're done. The xylene evaporates leaving you with a waxed chain.

I used dry lubes for a while too but found the homemade wax liquid the most trouble-free option.

[–] [email protected] 2 points 1 day ago

Sounds like you made a DIY version of a commercial drip wax. I use Silca's drip wax, and I'm getting really good value out of it, so I'm not motivated enough to try something homemade. But I'm glad it works for you, and no doubt is better than most other lubes!

[–] [email protected] 3 points 1 day ago (2 children)

Wow, this is super insightful! Thanks! Been wondering about waxing chains. We’re getting into our wet season so this is definitely piquing my curiosity once again.

[–] [email protected] 3 points 1 day ago

I just waxed the chain on my gravel bike and it’s going great so far. Maybe time to consider the mountain bikes. I do spend a lot of time lubing chains.

[–] [email protected] 1 points 1 day ago

We’re getting into our wet season so this is definitely piquing my curiosity once again.

Winter here gets slushy and salty, and I burned through a few chains two winters ago, then invested in "rustproof" chains last year, which worked well, but keeping on top of cleaning the inside of the chain and relubing was a PITA.

This year, I'll be rotating waxed chains.

[–] [email protected] 1 points 1 day ago (1 children)

Started with wet wax five years ago. Two years ago migrated to immersion waxing.

I do 5-10 chains at a time. It takes all of 15 minutes.

Then I wet wax between immersion waxing sessions.

Chains last a wildly long time and the time saved in between rides is incredible. Not to mention how clean all other parts stay.

[–] [email protected] 1 points 1 day ago (4 children)

I do 5-10 chains at a time.

For how many bikes??

load more comments (4 replies)
[–] [email protected] 1 points 1 day ago (2 children)

In my experience a lot of people are simply not aware of liquid chain wax like Squirt and think they have to put their chain in a heated pot or something.

[–] [email protected] 1 points 1 day ago

This is what I've been using for the last 12 years, and I've been happy. Immersion waxing seems interesting, but it does seem a bit daunting to me.

[–] [email protected] 2 points 1 day ago (1 children)

Drip wax is better than wet lube, but not as good as immersion wax. You CAN use drip wax over a chain that has been immersion waxed for ongoing top-ups, but it also depends on what works for you.

I use the site zerofrictioncycling to see which methods are best.

[–] [email protected] 1 points 1 day ago (1 children)

Yeah but I'm lazy and imo it is good enough, especially with how easy it is to apply. I know a lot of people think similarly about that process, except they don't know that there's an easy waxing way too and it is still superior to regular lubes.

[–] [email protected] 1 points 1 day ago

Yeah but I’m lazy and imo it is good enough, especially with how easy it is to apply.

For sure. You're already getting better, cleaner results than pretty much any wet lube out there - even the best stuff!

[–] [email protected] 1 points 1 day ago (1 children)

I really want to try waxing my chain but I commute on my bike and more than half the year it is wet and rainy so I had always read that it wouldn't really be suitable due to the wetness. It is interesting to hear that this may not actually be as much of an issue as I was lead to believe by everything I had dead about it.

I generally keep on top of my maintainance and will wash the bike usually once a week including cleaning the filthy as fuck chain.

Think I may look into waxing again after reading this.

[–] [email protected] 1 points 1 day ago (1 children)

Unless your commutes are 150 km a day, wax will still be better than wet lube. Rotating among multiple chains would be the way to go.

The lower the speed count, the less expensive the chain, but you'll save money in the long run, even with multiple 11 speed chains (which are way more expensive than something like a 7/8 speed chain).

I generally keep on top of my maintainance and will wash the bike usually once a week including cleaning the filthy as fuck chain.

I got tired of that. And realistically, you'll never get a "clean" chain when using wet lube unless you use an ultrasonic cleaner + solvents (and run it through multiple cleaning cycles). You can clean the outside of the chain, but the wear happens around the pins, and you can't wipe that clean.

load more comments (1 replies)
load more comments
view more: ‹ prev next ›