TDLR: I come to conclusion that my computer with 700W is using more that 1000W supported by PSU. Need confirmation before waste more $$$
Once and while my GPU crash, small freezes or window using gpu become noise. System still running, I can connect using ssh from other machine and kill everything to restart UI.
I am running prometheus/node_exporter that is collected by a raspberry pi, so there are a bunch of standard metrics.
First I was suspicious about temperature. Yes it get hot, but don't appears to be clear. Sometimes work well for long period of time on hot.
Looking into the metrics I found "node_hwmon_in_volts", gauge, "node_hwmon_in_volts Hardware monitor for voltage (input)". That is the only electronic metric I have, the motherboard don't appears to have a good driver for linux. I didn't find
I have 2 other intel computers and none report that, but both my AMD and raspberry pi report it. Is the "Power" in the chart. The raspberry pi report 12, that I read as 12V, but on my AMD computer normally below 1.0.
When idling, it stay on 0.7. On load fluctuate a bit. On heavy load it goes over 1.0 many times (red line). While some times ti goes without issue, I start to see the pattern that when above 1.0, its has tendency to work bad and crash, like when doing AI or player heavy. When I downgrade the graphic "playing low", no issue.
According with partpick my computer should use around 700W. Multiplied by 1.5 (as normally recommended) I have 1050W. So I bought a Cougar GEX x2 1000W. That according to cultists psu-tier-list it is a recommended B tier. So should be good.
Does my logic make any sense? Does anyone have a better suggestion? Can be a different problem?
No overclocking, I assembly, bios default. Only tune was be more aggressive into fan to see if reduce the problem.... Thanks for the suggestions, I not capable to do that, but can bring to shop. But confirm that should not use more that 1KW was good, so my theory is broken :D