this post was submitted on 23 Jun 2023
6 points (100.0% liked)

Free and Open Source Software

17941 readers
26 users here now

If it's free and open source and it's also software, it can be discussed here. Subcommunity of Technology.


This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.

founded 2 years ago
MODERATORS
 

I've been getting repeated emails from my ISP about "exceeding my bandwidth cap" and they feel very incorrect.

My current router is a Cisco RV260, and it doesn't have a great way of tracking traffic. (There's a port traffic screen that does give tx/rx bytes, but no way to see any date ranges).

Is there anything out there that can give an accurate account of Internet traffic? It would be nice if I could see destination domain/IPs, just for kicks and giggles, but an overall traffic count is all I really need.

Thanks!

you are viewing a single comment's thread
view the rest of the comments
[–] [email protected] 2 points 1 year ago (1 children)

I'm already using my own modem, none of that locked-down rental nonsense from my isp.

What hardware do you use for pf/opnSense? All of the recommended stuff I've seen is almost prohibitively expensive for my home networking budget.

[–] [email protected] 1 points 1 year ago (1 children)

My home network has one of those fanless 4 port doodaas from Amazon/eBay if you search for pfSense.
Never had an issue with it, I'm on 300/100mbit broadband tho.

For another project for 10gbps networking, I used a refubed single-socketed dell r630. Probably massively overkill. Also, never saw traffic anywhere near 10gbps... So can't really comment on that.

[–] [email protected] 2 points 1 year ago* (last edited 1 year ago) (1 children)

Yeah, those little micro units are what I had seen recommended. $300-400 is definitely pushing it for me. Especially when I would also want a bigger switch to accompany it.

Guess I need to stop eating avocado toast.

Edit: how is the stability/uptime for those little machines? Historically, I've always had problems with my routers needing to be rebooted at least once a month after they've been in service for 18-24 months. Even my current "business class" cisco router is crapping out on me every month.

[–] [email protected] 1 points 1 year ago (1 children)

My home box ran for a few years with no issues, until I started having DNS issues. I'm fairly certain that was unbound and the blocklists I had selected, tho.
I set up a Cron job to update the block lists every night, and give unbound service a restart.
It's been solid since then, and my DNS issues have disappeared.

Now, I am checking for updates and installing those every few months. So it gets a restart when that happens.

You could get a refurbished SFF computer that has a low profile PCIe slot, and put an Intel 4 port network card in it.
Would probably cost $150 tops. And its a solid entry! Certainly, that's what I used before I bought one of the fanless network appliance type things.

[–] [email protected] 1 points 1 year ago (1 children)

I have my old Athlon fx lying around. Needs a case, psu, and the nic... Hmmmm

[–] [email protected] 1 points 1 year ago

Might be a little old? Not sure, you would have to research it.
I'm not well versed in what pfSense/opnSense needs, which is why I threw r630s at a project that mattered.
Some cheapo refubed i3 with an Intel NIC card would do. I just suggested the SFF refurb because a lot of people like low power (and SFFs are generally low power)