this post was submitted on 27 Jun 2024
37 points (97.4% liked)
PC Master Race
14226 readers
1 users here now
A community for PC Master Race.
Rules:
- No bigotry: Including racism, sexism, homophobia, transphobia, or xenophobia. Code of Conduct.
- Be respectful. Everyone should feel welcome here.
- No NSFW content.
- No Ads / Spamming.
- Be thoughtful and helpful: even with ‘stupid’ questions. The world won’t be made better or worse by snarky comments schooling naive newcomers on Lemmy.
Notes:
- PCMR Community Name - Our Response and the Survey
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Cutting the power for 30 seconds drains capacitors. The most likely culprit is in the PSU, but I've also seen it be the motherboard or GPU.
Desktop PSUs have been pretty standardized for 25 years. The odds are pretty good that you still have an old one, or know someone that you could borrow from long enough to test.
Failing that, just get one from a place with a decent return policy. I like Micro Center, if you're near one of those.
It's always the damn caps!
The question is which one on which component :P
At least you can see blown capacitors sometimes.
I might try to disassemble PSU at some point to check since I don't see any on GPU or Motherboard.
(Also I know it can be dangerous but I know my way around high voltage from previous work so I should be fine)
Please don't disassemble your PSU....touch the wrong part and it can literally kill you
True, usually when you work with high voltage you make sure that everything is unplugged and safe. It's common sense and that's why even though you should call an electrician to change the light bulb nobody will tell you to not do it yourself. PSU is not that simple though. Capacitors can still hold a charge. Unless you got trained for working with high voltage you definitely shouldn't tinker with the PSU.
To add to what others have said. Since your computer runs fine when it's on I wonder if you'll see anything off but I suppose it's worth a shot as it's easy to test. Look up a 24pin diagram and use a multimeter to test if the pins are outputting the correct voltages.
In that weird can't power on PC state or it doesn't matter?
Try the weird state and the seemingly proper on state
I have some very old no name PSU but it's like 250W. Now GPU can draw this much power alone so my best bet would be buying new. With the option to return it might be worth a shot. Thanks!