Do-It-Yourself, Repairs and Fixes

If you use the same bolts and you're careful not to cross thread the studs, then it should have similar holding strength. I don't know how much it would be diminished if you did cross thread, though. The bolts for these mount tend to be rather large relative to the width of the studs, but my guess is that it wouldn't matter much.

What I do when I mount TV's, or anything heavy, is I first mount a plywood interface using a French cleat, and then bolt the TV mount to the plywood instead of the wall, so that I can position it exactly where I want it. I don't know if that will help here, but it might.

Just get a bit longer bolts and you'll be fine. I've mounted tvs at my job for 7 years and I have done this a ton and never had an issue. You'll be fine for sure if you're in the studs.

They're than Googling "foo," you should try a more relevant search term like "reuse TV wall mount holes." The first result from that is: https://diy.stackexchange.com/questions/15303/is-it-safe-to-re-use-drill-holes-in-a-wall#:~:text=If%20the%20screws%20go%20back,away%20from%20the%20existing%20holes.

Hopefully this improves your Google-fu.

I would give the same advice.

I would also take the features and integrity of the old mount into consideration. If it doesn't articulate, for instance, or if it doesn't have tilt adjust, then it might be worth upgrading the mount itself while it's off the wall.

I would also check for smooth operation, cracks, bulges or dents, or severe corrosion (unlikely near a TV but you never know). If the mount shows any of these, recycle it and get a new one.

As the article mentions, keeping the TV on the wall successfully for the long haul is the ultimate goal here.