this post was submitted on 28 Jun 2024
10 points (91.7% liked)

Bicycles

3127 readers
16 users here now

Welcome to [email protected]

A place to share our love of all things with two wheels and pedals. This is an inclusive, non-judgemental community. All types of cyclists are accepted here; whether you're a commuter, a roadie, a MTB enthusiast, a fixie freak, a crusty xbiking hoarder, in the middle of an epic across-the-world bicycle tour, or any other type of cyclist!


Community Rules


Other cycling-related communities

founded 1 year ago
MODERATORS
top 8 comments
sorted by: hot top controversial new old
[–] [email protected] 5 points 5 months ago (1 children)

The hot wax was gone from the chain in under 200 miles.

Wow, that makes it functionally useless imo. My current approach is really simple:

  1. Clean chain with a cleaning tool - 1-2 min
  2. Rinse and dry with a paper towel - 30s
  3. Add oil lube and dry with a towel - 30s

I do that whenever I remember (and check the chain stretch), and it seems to work pretty well. I keep a bottle of Simple Green for cleaner and dilute ~50/50, then lube with whatever my LBS sells. It seems to do a pretty good job...

[–] [email protected] 6 points 5 months ago* (last edited 5 months ago) (2 children)

I don't think they applied the wax right though, just hitting it with some WD40 isn't sufficient to completely clean off all the grease. Most people soak the chain in degreaser or even use one of those heated vibrating cleaners to really knock everything off and once it's completely clean/dry, then submerge it in a wax bath for at least a half hour to make sure it gets into everything.

[–] [email protected] 4 points 5 months ago (1 children)

Silca makes a pretty good degreaser that's one step and is pretty effective. It won't work as good if the chain is caked with crap and well used, but it's quite robust and will certainly do a good job with a newer chain. Anything more is overkill. It takes like 15 minutes too, start to finish, and if you do a good enough job you will only need to wash with hot water in the future.

[–] [email protected] 4 points 5 months ago

Not the first time I've heard praise about Silca's stuff...

[–] [email protected] 3 points 5 months ago* (last edited 5 months ago) (1 children)

Yeah, that could lead to pre-mature flaking of the wax. But the question is, is it closer to 200 miles, or the average time most people do between lubes (I do the shorter of 500 miles, every season, or if I went on a nasty wet ride).

[–] [email protected] 2 points 5 months ago (1 children)

Wow really? I lube like, every 300 miles with Tri Flow, is that excessive?

[–] [email protected] 3 points 5 months ago

Idk, it probably depends on where you ride. I mostly ride on dry bike paths, and I always store my bike inside. If I were riding on wet roads/muddy paths, I'd probably lube more often.

[–] [email protected] 2 points 5 months ago

In my experience the drip on wax is enough. I put new chain in acetone, then alcohol (each bath about a day), just in mason jar nothing fancy.

After installation I apply drip on wax, which lasts about 100-150 km (it is based on really soft paraffin so doesn't last long).